Special Purpose Spring Testing Machine For Locomotives
Features

Spring Testing Machine as per specification below:
1. Type : "C" frame down stroking (extended table)
2. Max. tonnage : 10 Tonnes
3. Stroke           : 600mm
4. Troat depth   : 250mm
5. Bed Size (LR XFB) 600x 600mm
6. Speeds
      (a) Testing Speed : 40mm/sec
      (b) Return Speed : 90mm/sec
7. Hydraulic System
      (d) Oil tank (Built in) : 100Ltrs approx.
      (e) Max. operating pressure : 250/kg/cm2
      (f) Motor HP : 7.5 HPx1440rpm.
8. Control System
      (c) Power supply : 3 phase, 415VAC ± 6%50HZ ± 3% 4 Wire
        (d) Controls: 230 VAC contactor relay logic.

Spring Testing Machine For Engineering Colleges

Model   : JSM - 2T
Capacity  : 2 tons.
Spring Testing Machine for testing / measuring the compression / tension and retraction of springs. The machine is provided with both the drives i.e. motorized as well as hand operated for most accurate working.

Spring Testing machine

Model    : JSM - 5 KN (Digital)
Spring Testing Machine for Testing / Measuring the compression, Tension and Retraction of Springs. The machine has a linear least count of 100 grams for load and 0.1 mm for displacement through out the range of 0 to 5 KN. The machine is manually / electrically operated and has digital read out for load as well s displacement for accurately measuring the deflection and expansion of springs.
The machine has a test height of 15 inch and is capable of holding springs of O.D. upto 8 inch.

Model  : JSM - 2000 (Digital)
Spring Testing Machine for testing / measuring the compression, Tension and retraction of springs. The machine has a linear least count of 500 grams through out the range of 0 to 2000 kgf. The machine is manually / electrically operated  and has digital read out for load as well as displacement for accurately measuring the deflection and expansion of springs.